Merry Christmas & Happy New Year
Showcase
Heidelberg PrintMaster QM 46-2
Heidelberg PrintMaster QM 46-2
Two-Color Press
(2005)
- Model: QM 46-2
- Serial Number: 965 xxx
- Year: 2005
- Impressions Count: 12.795.822
- Formats:
- Largest sheet: 18.11 x 13.39 in (460 x 340 mm)
- Smallest sheet: 5.51 x 3.50 in (140 x 89 mm)
- Largest print format: 17.83 x 12.99 in (453 x 330 mm)
- Gripper margin: 0.28 in (7 mm)
- Stock thickness: 0.0016 – 0.012 in (0.04 – 0.3 mm)
- Plates:
- Materials: Metal/Polyester
- Length x width max.: 19.88 x 13.39 in (505 x 340 mm)
- Thickness: 0.0039 – 0.0079 in (0.1 – 0.2 mm)
- Pile heights:
- Feeder: 19.29 in (490 mm)
- Delivery: 21.26 in (540 mm)
- Electrical: 240V / 1Ph / 60Hz / 16A
Heidelberg GTOVP 52+ (N)
1989 Heidelberg GTOVP 52+ (N)
- 14 x 20\” (32 x 46 cm)
- 4-color
- Alcolor Dampening
- Perfector
- Powder Sprayer
- Royse R&R
- Weko Powder Spray
- IR Dryer
- 22 mil impressions
- Bacher Plate Punch
- Geared for Numbering (no numbering)
The Heidelberg GTOVP 52+ is a 4-color offset printing press. It can print a maximum sheet size of 36 x 52 cm (14 x20 inches) and is equipped with Alcolor dampening and a perfector (which allows for printing on both sides of the sheet in a single pass).
For more info, please contact us.
Heidelberg GTOZP 46+ (N)
1981 Heidelberg GTOZP 46+ (N)
- 14 x 20\” (32 x 46 cm)
- 2-color
- Standard Dampening
- Perfector
- Powder Sprayer
- 48 million Impressions
- Geared for Numbering (no numbering)
The Heidelberg GTOZP 46+ is a 2-color offset printing press. It can print a maximum sheet size of 32 x 46 cm (12 x 18 inches) and is equipped with Standard dampening and a perfector (which allows for printing on both sides of the sheet in a single pass).
For more info, please contact us.
GBC/Billhofer Genesis 8300 Thermal Laminator
GBC / Billhofer Genesis 8300 Series Laminator
A Thermal Single Sided Laminator
with Hot Water Temperature Control
Manufactured: 1994
Mabeg Pile Feeder
Suction belt infeed
Single sided Thermal lamination
Chrome lamination cylinder
Max Sheet size: 28 x 40\” (72 x 104 cm)
Min Sheet size: 8 1/4 x 11\” (21 x 28 cm)
Max Pile Height: 30\” (76 cm)
- Paper Thickness: 80lbs – 24pt.
- Speed Range: Up to 150 ft./min
Sterlco Hot Water Temperature Control Unit
- Extra Laminator Roll
Electrical 230V / 60 HZ
The GBC / Billhofer Genesis 8300 is a thermal laminator. It is equipped with a Maybeg pile feeder, a suction belt infeed, and a single-sided thermal lamination capability. The lamination cylinder is coated with chrome, and the machine is capable of processing sheet sizes of up to 28×40\” (72 x 104 mm).
The pile feeder allows you to load a stack of documents into the laminator, while the suction belt infeed helps to hold the documents in place as they pass through the machine. The single-sided lamination feature means that the machine applies the plastic film to one side of the document only. The chrome lamination cylinder helps to apply the film evenly and smoothly to the surface of the document.
For more info, please contact us.
Sulby Compact 88 Perfect Binder
Sulby Compact 88
12 Clamp
Top Loading Pile Feeder
Glue Pot
The Sulby Compact 88 Perfect Binder is a machine used for binding printed materials with a maximum thickness of up to 50 millimeters, and it has a maximum speed of up to 2,000 cycles per hour.
For more info, please contact us.
Grapha 1296 3-Clamp Perfect Binder
Grapha PRINCE 1296
3-clamps
Automatic Cover feeder
Min. Book Thickness: 1/8\”
Maximum Book Thickness: 1 ½”
Spine Grinder
Manual Cover Feeder
Cycle Time: 10 sec
Dust Bag
Glue Pot Volume: 152 cubic inches
Glue Pot Temp Range: 122F – 572F
Speed: 360 B/hr.
The Grapha Prince 1296 is like Muller Martini Prince perfect binder. It has 3-clamps and manual cover feeder, and glue pot for efficient binding. It is ideal for small to medium-size print runs.
#939xxx
For more info, please contact us.
#939xxx